GDW G95

Category: Tag:

Description

G95 SIZEG95

 

G95 is a narrow-band tail-locking servo that cannot be directly plugged into the receiver. It can only work by selecting 760us through the gyroscope. The tail-locking servo is a special narrow-band signal, which cannot work normally when plugged into the receiver or the servo tester. (It is shown that the receiver does not move, most of the steering gear test meanings are also motionless, a few steering gear testers can make the steering move a little bit, anyway, it is not working properly) Only plug in the gyroscope, and choose the correct narrow Only the frequency signal can make the tail lock servo move (the gyroscope that is not connected to the computer and set up cannot make the tail lock servo move because the correct signal is not selected, K8 selects the second row in the tail lock page)

Additional information

Remark

Narrow frequency lock tail servo,
Steer gear,
Metal case

Motor Type

Brushless Motor 17*18mm

Operating Frequency

760us/333Hz

Torque,Speed,Size

18Kg.cm/0.08sec/60°@6.0V
22Kg.cm/0.07sec/60°@7.4V
25Kg.cm/0.06sec/60°@8.4V
55×37.5x20mm

Reviews

There are no reviews yet.

Be the first to review “GDW G95”

Your email address will not be published. Required fields are marked *